Kitchen Specifications & Measurements
UNBEATABLE: FIGURA SPRING ARTISAN Bespoke Kitchen, Wolf Hob, Gaggenau Oven, Miele Dishwasher, Surrey
Kitchen Ref: MW0918TR
All measurements are approximate – some elevations of this kitchen are handbuild, and may have been built in situ. Please read listing carefully. You will require a joiner to re-install this kitchen.
Dresser Style Unit with shelving:
1430 x 510d
We believe this constructed of one base unit with a separate counter-top unit
Sink run: total length 2945
1 x 260 drawer pack
1 x 650 dishwasher door
1 x 1010 sink base*
1 x 320 x 320 base corner with carousel *
Aga Run – total length including Aga space 5125
1 x 970 drawer pack
1 x 990 drawer pack
1 x 700 drawer pack with door fascia and internal drawers
Fitted Oak Cabinet with desk/bureau built in:
1800 x 307d @2175h
Recessed Cupboard with Carrara marble cool shelf :
NB: This is a resesssed cupboard with bi-fold doors and built in shelving in the top half (ie no cabinet) and the base has an external frame with cupboards behind
1850 x 675d @1990h
including under counter freezer
Cross Corner Fridge and additional Units:
1 x 535 drawer pack
1 x 640 (external measurement only) cross-corner fridge housing
1 x 610 drawer pack
Freestanding Island
1015 x 1850
Worktops: (From Left To Right)
Oak top for dresser: 1430 x 510
Sink run: Granite @30mm 2945 x 640 (495 at shortest point)
Hob run: Granite @30mm 1260 x 700
Recessed cupboard: Carrara marble
Oak – Corner unit top 1: 565 x 650
Oak – Corner unit top 2: 685 x 635
Freestanding island: Granite @ 30mm 1850 x 1015
* Please note: this is a hand made, bespoke kitchen. It has been hard to determine if some cabinets have an external frame or the joins between the cabinets have been filled/painted to become invisible – this will not be determined until we dismantle. Please also note, this is a hand painted kitchen. Separation of the units will inevitably mean that the paint work will require touch-up or even repainting. Pieces that could be an external frame ie a number of cabinets joined together have been identified with a *
Surveyor Notes:
- In very good used condition.
- Slight wear to hand painted surfaces, however, touch up of painted surfaces is assumed – see above
- Access: some parking restrictions. Seek advice from UKE if planning self collection
Removal Notes:
Granite/Quartz/Marble – Whilst every attempt will be made to successfully remove stone worktops without damage, this is not always possible. Therefore, pieces of granite with ‘cut outs’ eg Sinks, Hobs etc cannot be guaranteed. Likewise stone back splashes, upstands and window sills are also not guaranteed. These pieces will be given to the buyer free of charge if successfully removed and are therefore not included in the overall sales price. Breakages are rare, but sometimes unavoidable, but most cases the worktop can be fixed with an epoxy adhesive by yourself or through a local granite Supplier.
Corian – Corian is a specialist worktop. The beauty of Corian is all joins are invisible. When Corian is installed it comes into the property in pieces and the joins are ‘blended’ to become invisible. Once joined, it becomes 1 large piece. In order to remove and transport a Corian worktop it is normal to expect this to be cut – this is often necessary due to the sizes/shapes/weight of the pieces. During removal, the joiner will assess the best place to cut – to reinstall, a Corian expert will be required. It is worth noting that it is normally possible to ‘add’ to a corian worktop if required.
Laminate worktops – Removal of a Laminate worktop will nearly always result in un-repairable damage to the laminates surface. Therefore, Laminate worktops are always excluded from any sale
Kitchen reconfiguration – Please consider that if the configuration of the kitchen is to be changed, end panels, kick boards/plinths, decorative trims etc may not re reusable because of their size, cut outs, fading, screw holes etc.
Painted Kitchens – Often painted kitchens are painted once installed, this means that during removal painted finishes may be chipped. It is reasonable to expect some touch up painting once your kitchen is re-installed.
Appliances – Whilst the listing above includes description of the appliances ,we strongly recommend that all appliances have an electrical and/or gas safety check, by a qualified electrical and/ or gas Safe registered engineer as appropriate. Electrical goods need to be checked to confirm that the plug, socket or adapter supplied complies with the appropriate current regulations.
Cleaning – Please be aware that this kitchen is advertised as ‘Used’; it is therefore reasonable to expect some additional cleaning and possibly some minor repairs when refitting.
Plastic Cabinet Legs – These are the unseen adjustable supports for cabinets, normally hidden by the kick-boards. Unfortunately, these can be broken during the removal process. These are easy and very inexpensive to replace. Readily available at B&Q or Screwfix.
UNBEATABLE: FIGURA SPRING ARTISAN Bespoke Kitchen, Wolf Hob, Gaggenau Oven, Miele Dishwasher, Surrey
Kitchen Ref: MW0918TR
All measurements are approximate – some elevations of this kitchen are handbuild, and may have been built in situ. Please read listing carefully. You will require a joiner to re-install this kitchen.
Dresser Style Unit with shelving:
1430 x 510d
We believe this constructed of one base unit with a separate counter-top unit
Sink run: total length 2945
1 x 260 drawer pack
1 x 650 dishwasher door
1 x 1010 sink base*
1 x 320 x 320 base corner with carousel *
Aga Run – total length including Aga space 5125
1 x 970 drawer pack
1 x 990 drawer pack
1 x 700 drawer pack with door fascia and internal drawers
Fitted Oak Cabinet with desk/bureau built in:
1800 x 307d @2175h
Recessed Cupboard with Carrara marble cool shelf :
NB: This is a resesssed cupboard with bi-fold doors and built in shelving in the top half (ie no cabinet) and the base has an external frame with cupboards behind
1850 x 675d @1990h
including under counter freezer
Cross Corner Fridge and additional Units:
1 x 535 drawer pack
1 x 640 (external measurement only) cross-corner fridge housing
1 x 610 drawer pack
Freestanding Island
1015 x 1850
Worktops: (From Left To Right)
Oak top for dresser: 1430 x 510
Sink run: Granite @30mm 2945 x 640 (495 at shortest point)
Hob run: Granite @30mm 1260 x 700
Recessed cupboard: Carrara marble
Oak – Corner unit top 1: 565 x 650
Oak – Corner unit top 2: 685 x 635
Freestanding island: Granite @ 30mm 1850 x 1015
* Please note: this is a hand made, bespoke kitchen. It has been hard to determine if some cabinets have an external frame or the joins between the cabinets have been filled/painted to become invisible – this will not be determined until we dismantle. Please also note, this is a hand painted kitchen. Separation of the units will inevitably mean that the paint work will require touch-up or even repainting. Pieces that could be an external frame ie a number of cabinets joined together have been identified with a *
Surveyor Notes:
- In very good used condition.
- Slight wear to hand painted surfaces, however, touch up of painted surfaces is assumed – see above
- Access: some parking restrictions. Seek advice from UKE if planning self collection
Removal Notes:
Granite/Quartz/Marble – Whilst every attempt will be made to successfully remove stone worktops without damage, this is not always possible. Therefore, pieces of granite with ‘cut outs’ eg Sinks, Hobs etc cannot be guaranteed. Likewise stone back splashes, upstands and window sills are also not guaranteed. These pieces will be given to the buyer free of charge if successfully removed and are therefore not included in the overall sales price. Breakages are rare, but sometimes unavoidable, but most cases the worktop can be fixed with an epoxy adhesive by yourself or through a local granite Supplier.
Corian – Corian is a specialist worktop. The beauty of Corian is all joins are invisible. When Corian is installed it comes into the property in pieces and the joins are ‘blended’ to become invisible. Once joined, it becomes 1 large piece. In order to remove and transport a Corian worktop it is normal to expect this to be cut – this is often necessary due to the sizes/shapes/weight of the pieces. During removal, the joiner will assess the best place to cut – to reinstall, a Corian expert will be required. It is worth noting that it is normally possible to ‘add’ to a corian worktop if required.
Laminate worktops – Removal of a Laminate worktop will nearly always result in un-repairable damage to the laminates surface. Therefore, Laminate worktops are always excluded from any sale
Kitchen reconfiguration – Please consider that if the configuration of the kitchen is to be changed, end panels, kick boards/plinths, decorative trims etc may not re reusable because of their size, cut outs, fading, screw holes etc.
Painted Kitchens – Often painted kitchens are painted once installed, this means that during removal painted finishes may be chipped. It is reasonable to expect some touch up painting once your kitchen is re-installed.
Appliances – Whilst the listing above includes description of the appliances ,we strongly recommend that all appliances have an electrical and/or gas safety check, by a qualified electrical and/ or gas Safe registered engineer as appropriate. Electrical goods need to be checked to confirm that the plug, socket or adapter supplied complies with the appropriate current regulations.
Cleaning – Please be aware that this kitchen is advertised as ‘Used’; it is therefore reasonable to expect some additional cleaning and possibly some minor repairs when refitting.
Plastic Cabinet Legs – These are the unseen adjustable supports for cabinets, normally hidden by the kick-boards. Unfortunately, these can be broken during the removal process. These are easy and very inexpensive to replace. Readily available at B&Q or Screwfix.
