Kitchen Specifications & Measurements
Siematic SC10 Used Kitchen and Neff Appliances Leeds CW0618CM
All measurements are approximate
Maximum height of the kitchen: 1700
U Shaped kitchen: 2225 x 2890 x 2150
Tall units: 2430 x 600
U Shaped Kitchen
Base units @ 890h
1 x 20 end panel left
1 x 500 drawer pack
1 x 600 oven housing
1 x 150 tray cupboard
1 x 850 base corner pull out with 300 doors
1 x 600 base sink unit
1 x 450
1 x 70 corner post
1 x 70 corner post
1 x 970 pull out corner unit with 600 door
1 x 20 end panel right
1 x 60
Reverse side
1 x 900 base unit @ 200d
1 x 300 shelving unit @ 200d
Midi units @ 1700h
1 x 30 filler @ 1580h
1 x 450
1 x 450
1 x 450 appliance housing
1 x 450
1 x 450
Worktops
1 x 2225 x 650 hob side
1 x 1400 x 650 sink side
1 x 2150 x 840 Peninsular with composite end panel and faux edge
Surveyor Notes
- Kitchen is in very good used condition
- Some marks on the breakfast bar from chairs – we believe this can be cleaned off
- Access notes: this kitchen has a narrow path on entrance and is a semi detached house that is currently having building work done on the site. There is also a narrow road. For advice on access please liaise with UKE after purchase if planning self collection.
Removal Notes:
Granite/Quartz/Marble – Whilst every attempt will be made to successfully remove stone worktops without damage, this is not always possible. Therefore, pieces of granite with ‘cut outs’ eg Sinks, Hobs etc cannot be guaranteed. Likewise stone back splashes, upstands and window sills are also not guaranteed. These pieces will be given to the buyer free of charge if successfully removed and are therefore not included in the overall sales price. Breakages are rare, but sometimes unavoidable, but most cases the worktop can be fixed with an epoxy adhesive by yourself or through a local granite Supplier.
Corian – Corian is a specialist worktop. The beauty of Corian is all joins are invisible. When Corian is installed it comes into the property in pieces and the joins are ‘blended’ to become invisible. Once joined, it becomes 1 large piece. In order to remove and transport a Corian worktop it is normal to expect this to be cut – this is often necessary due to the sizes/shapes/weight of the pieces. During removal, the joiner will assess the best place to cut – to reinstall, a Corian expert will be required. It is worth noting that it is normally possible to ‘add’ to a corian worktop if required.
Laminate worktops – Removal of a Laminate worktop will nearly always result in un-repairable damage to the laminates surface. Therefore, Laminate worktops are always excluded from any sale
Kitchen reconfiguration – Please consider that if the configuration of the kitchen is to be changed, end panels, kick boards/plinths, decorative trims etc may not re reusable because of their size, cut outs, fading, screw holes etc.
Painted Kitchens – Often painted kitchens are painted once installed, this means that during removal painted finishes may be chipped. It is reasonable to expect some touch up painting once your kitchen is re-installed.
Appliances – Whilst the listing above includes description of the appliances ,we strongly recommend that all appliances have an electrical and/or gas safety check, by a qualified electrical and/ or gas Safe registered engineer as appropriate. Electrical goods need to be checked to confirm that the plug, socket or adapter supplied complies with the appropriate current regulations.
Cleaning – Please be aware that this kitchen is advertised as ‘Used’; it is therefore reasonable to expect some additional cleaning and possibly some minor repairs when refitting.
Siematic SC10 Used Kitchen and Neff Appliances Leeds CW0618CM
All measurements are approximate
Maximum height of the kitchen: 1700
U Shaped kitchen: 2225 x 2890 x 2150
Tall units: 2430 x 600
U Shaped Kitchen
Base units @ 890h
1 x 20 end panel left
1 x 500 drawer pack
1 x 600 oven housing
1 x 150 tray cupboard
1 x 850 base corner pull out with 300 doors
1 x 600 base sink unit
1 x 450
1 x 70 corner post
1 x 70 corner post
1 x 970 pull out corner unit with 600 door
1 x 20 end panel right
1 x 60
Reverse side
1 x 900 base unit @ 200d
1 x 300 shelving unit @ 200d
Midi units @ 1700h
1 x 30 filler @ 1580h
1 x 450
1 x 450
1 x 450 appliance housing
1 x 450
1 x 450
Worktops
1 x 2225 x 650 hob side
1 x 1400 x 650 sink side
1 x 2150 x 840 Peninsular with composite end panel and faux edge
Surveyor Notes
- Kitchen is in very good used condition
- Some marks on the breakfast bar from chairs – we believe this can be cleaned off
- Access notes: this kitchen has a narrow path on entrance and is a semi detached house that is currently having building work done on the site. There is also a narrow road. For advice on access please liaise with UKE after purchase if planning self collection.
Removal Notes:
Granite/Quartz/Marble – Whilst every attempt will be made to successfully remove stone worktops without damage, this is not always possible. Therefore, pieces of granite with ‘cut outs’ eg Sinks, Hobs etc cannot be guaranteed. Likewise stone back splashes, upstands and window sills are also not guaranteed. These pieces will be given to the buyer free of charge if successfully removed and are therefore not included in the overall sales price. Breakages are rare, but sometimes unavoidable, but most cases the worktop can be fixed with an epoxy adhesive by yourself or through a local granite Supplier.
Corian – Corian is a specialist worktop. The beauty of Corian is all joins are invisible. When Corian is installed it comes into the property in pieces and the joins are ‘blended’ to become invisible. Once joined, it becomes 1 large piece. In order to remove and transport a Corian worktop it is normal to expect this to be cut – this is often necessary due to the sizes/shapes/weight of the pieces. During removal, the joiner will assess the best place to cut – to reinstall, a Corian expert will be required. It is worth noting that it is normally possible to ‘add’ to a corian worktop if required.
Laminate worktops – Removal of a Laminate worktop will nearly always result in un-repairable damage to the laminates surface. Therefore, Laminate worktops are always excluded from any sale
Kitchen reconfiguration – Please consider that if the configuration of the kitchen is to be changed, end panels, kick boards/plinths, decorative trims etc may not re reusable because of their size, cut outs, fading, screw holes etc.
Painted Kitchens – Often painted kitchens are painted once installed, this means that during removal painted finishes may be chipped. It is reasonable to expect some touch up painting once your kitchen is re-installed.
Appliances – Whilst the listing above includes description of the appliances ,we strongly recommend that all appliances have an electrical and/or gas safety check, by a qualified electrical and/ or gas Safe registered engineer as appropriate. Electrical goods need to be checked to confirm that the plug, socket or adapter supplied complies with the appropriate current regulations.
Cleaning – Please be aware that this kitchen is advertised as ‘Used’; it is therefore reasonable to expect some additional cleaning and possibly some minor repairs when refitting.
