Kitchen Specifications & Measurements
JOHNSON & JOHNSON Large Traditional In-Frame Used Kitchen with Island, Granite Worktops, Cheshire
JOHNSON & JOHNSON Large Traditional In-Frame Used Kitchen with Island, Granite Worktops, Cheshire
All measurements are approximate
L Shape Kitchen Base Units:
1 x 75 filler
1 x 600
1 x 20 filler
1 x 100 pilaster
1 x 20 filler
1 x 1200 base sink
1 x 20 filler
1 x 100 pilaster
1 x 20 filler
1 x 800 drawer pack
1 x 20 filler
1 x 1100 cross-corner unit @2400h – measurement is external (this cabinet will most probably be removed in sections and could be flat packed as it may have been built insitu)
1 x 1000
1 x 600 wine rack
1 x 1000
1 x 20 filler
1 x 100 pilaster
1 x 20 filler
1 x 400 drawer pack
1 x 400 drawer pack
1 x 20 filler
1 x 100 pilaster
Island:
1 x 1200
1 x 600
1 x 300
1 x 600 base sink
1 x 1000
Table base: 2200 x 350 @720h
Kitchen Wall Units @ 850h
1 x 560 (200 depth)
1 x 20 filler
1 x 100 pilaster @ 1400h
1 x 20 filler
1 x counter top unit @ 1400h appliance housing
1 x 20 filler
1 x 1000
1 x 1730 bridge with lights
1 x 400 with glass door
1 x 990 bridge
1 x 400 with glass door
Worktops: Granite @ 30mm
Sink run
2760 x 600 (700 @ sink)
890 x 600
Aga Run
3140 x 600 (700 at range)
560 x 690
Island: 30mm Granite & Butchers Block – approx measurements
Sink piece: 1860 x 1570
890 x 600
990 x 650
Table piece: 2680 x 990
Wooden butchers block top: 580 x 580
Surveyor Notes:
- No access issues noted
- Damage noted:
- 2 doors on island have some surface varnish wear (see photograph)
- Extractor may benefit from a clean post installation.
Removal Notes
Trusted Trader Removal- Used Kitchen Exchange offer a Which? Trusted Trader service for Kitchen Dismantle. This is offered to all our sellers
Granite/Quartz/Marble – Whilst every attempt will be made to successfully remove stone worktops without damage, this is not always possible. Therefore, pieces of granite with ‘cut outs’ eg sinks, hobs, etc. cannot be guaranteed. Likewise stone back splashes, upstands and window sills are also not guaranteed. These pieces will be given to the buyer free of charge if successfully removed and are therefore not included in the overall sales price. Breakages are rare, but sometimes unavoidable, but most cases the worktop can be fixed with an epoxy adhesive by yourself or through a local granite Supplier.
Occasionally a kitchen may have a chimney breast and mantle. In most cases this is ‘faux’ and the mantle will sit on top of a solid piece of work-surface. However, sometimes the work-surface may be cut around the chimney breast, leaving a cut out on removal. It is normally possible for us to identify if this will be the case, however not in every case. Buyers must be aware of this and plan for this to avoid disappointment.
Corian – Corian is a specialist worktop. The beauty of Corian is all joins are invisible. When Corian is installed it comes into the property in pieces and the joins are ‘blended’ to become invisible. Once joined, it becomes 1 large piece. In order to remove and transport a Corian worktop it is normal to expect this to be cut – this is often necessary due to the sizes/shapes/weight of the pieces. During removal, the joiner will assess the best place to cut – to reinstall, a Corian expert will be required. It is worth noting that it is normally possible to ‘add’ to a corian worktop if required.
Laminate worktops – Removal of a Laminate worktop will nearly always result in unrepairable damage to the laminate’s surface. Therefore, laminate worktops are always excluded from any sale.
Kitchen reconfiguration – Please consider that if the configuration of the kitchen is to be changed, end panels, kick boards/plinths, decorative trims etc may not re reusable because of their size, cut outs, fading, screw holes etc.
Painted Kitchens – Often painted kitchens are painted once installed, this means that during removal painted finishes may be chipped. It is reasonable to expect some touch up painting once your kitchen is re-installed.
Appliances – Whilst the listing above includes description of the appliances ,we strongly recommend that all appliances have an electrical and/or gas safety check, by a qualified electrical and/ or Gas Safe registered engineer as appropriate. Electrical goods need to be checked to confirm that the plug, socket or adapter supplied complies with the appropriate current regulations.
Cleaning – Please be aware that this kitchen is advertised as ‘Used’ – it is therefore reasonable to expect some additional cleaning and possibly some minor repairs when refitting.
Plastic Cabinet Legs – These are the unseen adjustable supports for cabinets, normally hidden by the kick-boards. Unfortunately, these can be broken during the removal process. These are easy and very inexpensive to replace. Readily available at B&Q or Screwfix.
JOHNSON & JOHNSON Large Traditional In-Frame Used Kitchen with Island, Granite Worktops, Cheshire
JOHNSON & JOHNSON Large Traditional In-Frame Used Kitchen with Island, Granite Worktops, Cheshire
All measurements are approximate
L Shape Kitchen Base Units:
1 x 75 filler
1 x 600
1 x 20 filler
1 x 100 pilaster
1 x 20 filler
1 x 1200 base sink
1 x 20 filler
1 x 100 pilaster
1 x 20 filler
1 x 800 drawer pack
1 x 20 filler
1 x 1100 cross-corner unit @2400h – measurement is external (this cabinet will most probably be removed in sections and could be flat packed as it may have been built insitu)
1 x 1000
1 x 600 wine rack
1 x 1000
1 x 20 filler
1 x 100 pilaster
1 x 20 filler
1 x 400 drawer pack
1 x 400 drawer pack
1 x 20 filler
1 x 100 pilaster
Island:
1 x 1200
1 x 600
1 x 300
1 x 600 base sink
1 x 1000
Table base: 2200 x 350 @720h
Kitchen Wall Units @ 850h
1 x 560 (200 depth)
1 x 20 filler
1 x 100 pilaster @ 1400h
1 x 20 filler
1 x counter top unit @ 1400h appliance housing
1 x 20 filler
1 x 1000
1 x 1730 bridge with lights
1 x 400 with glass door
1 x 990 bridge
1 x 400 with glass door
Worktops: Granite @ 30mm
Sink run
2760 x 600 (700 @ sink)
890 x 600
Aga Run
3140 x 600 (700 at range)
560 x 690
Island: 30mm Granite & Butchers Block – approx measurements
Sink piece: 1860 x 1570
890 x 600
990 x 650
Table piece: 2680 x 990
Wooden butchers block top: 580 x 580
Surveyor Notes:
- No access issues noted
- Damage noted:
- 2 doors on island have some surface varnish wear (see photograph)
- Extractor may benefit from a clean post installation.
Removal Notes
Trusted Trader Removal- Used Kitchen Exchange offer a Which? Trusted Trader service for Kitchen Dismantle. This is offered to all our sellers
Granite/Quartz/Marble – Whilst every attempt will be made to successfully remove stone worktops without damage, this is not always possible. Therefore, pieces of granite with ‘cut outs’ eg sinks, hobs, etc. cannot be guaranteed. Likewise stone back splashes, upstands and window sills are also not guaranteed. These pieces will be given to the buyer free of charge if successfully removed and are therefore not included in the overall sales price. Breakages are rare, but sometimes unavoidable, but most cases the worktop can be fixed with an epoxy adhesive by yourself or through a local granite Supplier.
Occasionally a kitchen may have a chimney breast and mantle. In most cases this is ‘faux’ and the mantle will sit on top of a solid piece of work-surface. However, sometimes the work-surface may be cut around the chimney breast, leaving a cut out on removal. It is normally possible for us to identify if this will be the case, however not in every case. Buyers must be aware of this and plan for this to avoid disappointment.
Corian – Corian is a specialist worktop. The beauty of Corian is all joins are invisible. When Corian is installed it comes into the property in pieces and the joins are ‘blended’ to become invisible. Once joined, it becomes 1 large piece. In order to remove and transport a Corian worktop it is normal to expect this to be cut – this is often necessary due to the sizes/shapes/weight of the pieces. During removal, the joiner will assess the best place to cut – to reinstall, a Corian expert will be required. It is worth noting that it is normally possible to ‘add’ to a corian worktop if required.
Laminate worktops – Removal of a Laminate worktop will nearly always result in unrepairable damage to the laminate’s surface. Therefore, laminate worktops are always excluded from any sale.
Kitchen reconfiguration – Please consider that if the configuration of the kitchen is to be changed, end panels, kick boards/plinths, decorative trims etc may not re reusable because of their size, cut outs, fading, screw holes etc.
Painted Kitchens – Often painted kitchens are painted once installed, this means that during removal painted finishes may be chipped. It is reasonable to expect some touch up painting once your kitchen is re-installed.
Appliances – Whilst the listing above includes description of the appliances ,we strongly recommend that all appliances have an electrical and/or gas safety check, by a qualified electrical and/ or Gas Safe registered engineer as appropriate. Electrical goods need to be checked to confirm that the plug, socket or adapter supplied complies with the appropriate current regulations.
Cleaning – Please be aware that this kitchen is advertised as ‘Used’ – it is therefore reasonable to expect some additional cleaning and possibly some minor repairs when refitting.
Plastic Cabinet Legs – These are the unseen adjustable supports for cabinets, normally hidden by the kick-boards. Unfortunately, these can be broken during the removal process. These are easy and very inexpensive to replace. Readily available at B&Q or Screwfix.
